VJDJ-1 Carling ON/OFF/ON double pole rocker switch with jumper and two lamps

• This is a Switch Body Only. Actuators are sold separately.
• ON/OFF/ON configuration, double pole double throw

• Two lamps

• 7 terminal; The top right terminal is the ground for the lamps. The middle terminals are power "in" and they have an external jumper installed so only one power wire will be required to power both sides of the switch. The other two pairs of terminals are power "out". The switch is "off" when the actuator is in the middle position. At times these switches are wired differently. The important thing to remember is how the switch operates. When the bottom of the actuator is depressed, the middle two terminals make contact with the top two terminals. When the top of the actuator is depressed, the middle two terminals make contact with the bottom two terminals. As with all double pole switches, the two sides are independent of each other. So the terminals on the left side of the switch never make contact with the terminals on the right side of the switch unless you install an external jumper, which in this case is supplied for the middle terminals only.

• Common for Marine, RV, automotive, and other 12V DC applications.

• Part# VJDJ-1 Commonly used for navigation lights

• Choose from a variety of actuators with different lenses. Actuator part numbers begin with VV.

For instructional videos, please visit our YouTube channel:

www.youtube.com/fpmarine