VAD1-2 Carling ON/OFF double pole rocker switch w/red and green lamps.

VAD1-2

• ON/OFF configuration
• The double pole switch is most often used to operate two separate lights, pumps, bilge blowers, etc. Wellcraft, Monterey, Boston Whaler and others have used this switch
• 12V green independent lamp in the #1 (top) position is wired to terminals #7 and #8 and illuminates independently of actuator position.
• 12V Red dependent lamp in #2 (bottom) position is wired to terminals #3 and #7. The red lamp in position 2 illuminates when the switch is actuated to the ON position.
• An independent lamp has both a positive and negative terminal as opposed to the standard switches that just have a negative terminal. Independent lamps can be lit independently of the actuator position as opposed to standard "dependent" lamps that get their power internally when the actuator moves to the "on" position
  
• 6 terminal; Terminal #7 is the ground for the lamps, Terminal #8 is the power feed for the green independent lamp. Terminals #2,#5 are power in. Terminals #3,#6 are power out. The two sides of the switch are independent of each other.
• Terminals #1 and #4 are not present in this particular switch. See our link to the reference page below if you need assistance in identifying terminal locations.
  
• Common for Marine, RV, automotive, and other 12V DC applications.
  
• Choose from a variety of actuators with different lenses.
  
• Carling Part# VAD1GHTB

For instructional videos, please visit our YouTube channel:

www.youtube.com/fpmarine