Description
Jumpseat Pocket
- HDPE "Starboard" construction - will not break apart like the original plastic units
- Installs into the fiberglass to create a pocket for the jumpseats.
- Sold as a pair -
- Dimensions: Approximately 11-3/8" x 2" (287 x 50mm)
Inside pocket dimensions: Approximately 8-3/8" x 1-1/4" x 7/8" depth. (214 x 32mm x 21.5mm depth)
- Mounting holes are not pre-drilled to allow you flexibility to relocate the holes if your original holes in the fiberglass are cracked or enlarged.
This jumpseat pocket insert cleat support for Wellcraft Hydrasports Aquasport
This design was based on a 1999 Wellcraft 210 Fisherman CC
- HDPE "Starboard" construction - will not break apart like the original plastic units
- Installs into the fiberglass to create a pocket for the jumpseats.
- Sold as a pair -
- Dimensions: Approximately 11-3/8" x 2" (287 x 50mm)
Inside pocket dimensions: Approximately 8-3/8" x 1-1/4" x 7/8" depth. (214 x 32mm x 21.5mm depth)
- Mounting holes are not pre-drilled to allow you flexibility to relocate the holes if your original holes in the fiberglass are cracked or enlarged.
This jumpseat pocket insert cleat support for Wellcraft Hydrasports Aquasport
This design was based on a 1999 Wellcraft 210 Fisherman CC
Click the icons below for instructional videos on our YouTube channel, and to follow us on Facebook & Instagram.
We want to see your boat! Send us your photos to be featured: photos@fpmarine.com
