Dash Panel Color Selection

All of the "Stardust" colors have a metal flake type appearance. It is subtle but will sparkle under the right light. This color looks great as a replacement for plain black panels.

Medium dark brown. The stardust flake makes the color look lighter under the right lighting conditions. Excellent contrast with white engraving

Light gold color, similar shade to a maple wood. The stardust flake will sparkle under the right light. Good with black or white engraving, but white will have better contrast

This silver has a darker appearance when viewed from the side, almost like a pewter color. The right light makes it sparkle and turns the color to a brighter silver

Light green color with the stardust flake. Good contrast with white or black engraving

Really more of a light blue or sky blue. Really nice transition when in the right light. The flake pops on this color. Good results with black or white engraving

Nice smooth color with ultrafine metal flake look. It is a perfect 2008 Cadillac match

Nice silver with a very fine metal type flake. Good replacement for original Wellcraft panels if you are looking for the same look. Black engraving only, white will not show up well.

This is our custom developed color to match 2002 and newer Sea Ray models. It is a deep cherry with black burl swirls. White engraving is high contrast. This color looks great in replacing any of the dark burls found on Wellcraft, Regal, Monterey, etc.

Great looking Carbon Fiber pattern under a 1/8" thick layer of clear acrylic. White engraving contrasts nicely and allows for backlighting

We refer to this color as "Clear Black" because it is a black color underneath a 1/8" thick layer of clear acrylic.

Our Flat black is more of a satin finish with low light reflection, good smudge resistance, and a nice conservative look. White engraving is below the surface so it will not fade, wipe off, or get dirty. Engraved text, logos, and outlines come out sharp and bold. Must be cleaned gently with mild soaps and water and soft rag. Rubbing, buffing, or aggressive cleaning will change the flat finish to a gloss finish.

The color is under a 1/8" thick layer of clear acrylic so any engraving highlights the depth of the panel. This would be considered "Plain White" or "Solid white"