Fully Wired Replacement Switch Panel - Maverick Master Angler

Please click here see our Library/Tech Center for videos, articles, and FAQ's

• Boat Manufacturer: Maverick
• OEM Part#*: -  
  
• Fits Models*: - Master Angler and others with 16-5/8" x 3" panel
  
• Construction: Acrylic 3/16"
• Accessory Panels Available:
  
• Switch Kit Available: Included

* May fit other models/years, Part# for search/reference only

SPECIFICATIONS:

HISTORY: The original switch panels were offered with 6, 7, or 8 switch positions. There were many configurations and a few different size panels for the Maverick boats. Some had a switch position for "Choke" which is now obsolete or can be handled through a keyswitch. Some older boats had this same size panel and used toggle switches. This is a perfect upgrade to rocker switches. This size panel was found on Master Anglers and possibly others.

This upgraded 8 position switch panel is designed to replace any one of the factory original panels that measure approximately 16-5/8" x 3"and give increased quality and functionality!

This is a complete replacement system. You provide the power feed from your batteries and main circuit breaker. Our fuse block is fully harnessed to supply the switch panel with power. The harness leaving the switch panel is labeled and you simply splice to the wires that lead to each accessory. The wire colors on your factory boat harness varied over the years and models. Our wire harness colors may not match all of your original colors. We label the individual wires on our harness so you can match up to your existing harness by function. We supply high quality Molex heat shrink butt connectors for the splice. Deutsch connectors on the main harness make removing your panel a breeze.

FEATURES:

• Complete system.
• Marine grade tinned copper 14ga. wire and heat shrink connections.
• Genuine Deutsch connectors for convenient quick disconnect points.
• Genuine Carling Switches.
• Genuine Molex terminal connections.
• Blue Seas heavy duty 12 port fuse block.
• Color coded and labeled pigtail wires to connect to your existing boat harness. (colors may not match your original harness)
• Includes genuine Molex Permaseal heat shrink butt connectors for your splices to your existing harness.
• 8 switch positions handle all stock functions.
• Exceeds current OEM quality.

OPTIONS:

Custom Switch label engraving is available for a nominal $35 charge.
(Custom labeling for the switches includes simple text changes to the "ACC" functions. Changing switch configurations would require harness changes which are not available for this product.) Choosing this option will typically add approximately a 5-7 day lead time.

Panel Dimensions: Approximately 16-5/8" x 3"